Tiles are the most important aspect of modern interior design, adding beauty, durability, and sophistication to walls and floors, but getting that look isn’t only about the tile itself, it also about what adhesive and grout will enhance your look
Luxture Tile Adhesive & Tile Grout are engineered to provide superior bond strength, flexibility, and a smooth finish to keep your tile looking great.
In this guide, we will introduce you to how to professionally apply the Luxture Tile Adhesive & Tile Grout for long-lasting, flawless walls and floors
Step-by-Step Instructions on Using Luxture Tile Adhesive
Make sure the surface of the wall or floor is free of moisture and levels.
Remove all dust, grease and loose material.
Lightly moist rock hard surfaces just prior to applying adhesive.
Put clean water in a mixing bucket.
While stirring, gradually add Luxture Tile Adhesive to the bucket.
You can use an electric mixer to ensure a smooth, lump free consistency.
Allow the mixture to set for 5 minutes then re-mix.
With a notched trowel, spread adhesive evenly on the surface.
Cover small areas (up to 1m² per loss) to avoid drying out before tiling.
A flat bed of adhesive makes for better adhesion with the tile.
Step Four: Set the Tiles
Gently push the tiles down into the adhesive.
Use spacers to insure consistent gaps.
Ensure the tiles are seated properly by tapping them down gently with a rubber mallet.
Step Five: Allow the Tiles to Set
Give the tiles at least 24 hours of setting time before grouting.
Be sure not to move into or walk on your newly tiled area while it is setting.
Step-By-Step Instruction for Applying Luxture Tile Grout
In a clean bucket or container, measure the recommended amount of Luxture Tile Grout to water.
Now mix your Luxture Tile Grout with water until it reaches a nice creamy paste.
Grab your rubber float and apply a diagonal application of the grout across the joints of the tiles. Be sure every gap is filled.
After about 15–20 minutes, take a damp sponge and wipe off any excess grout on the surface of the tile.
Rinse out the sponge often to avoid any haze from developing on the tiles.
After the product fully dries, take a dry cloth and buff the surface to shine it up.
If desired, if you have excess moisture, you can seal the joints as added protection against moisture.
Tips for a Professional Finish
Use Quality Tools – A good trowel, level, and spacers will make all the difference.
Don’t Overmix – Mix only as much adhesive and grout as you can use right away.
Temperature is Important – Use moderate working conditions for best results.
Clean often – Always clean away adhesive before it hardens.
Right Luxture Products – Use the correct adhesive and grout to coordinate with the tile size and type of surface.
🧰 Tools to Have:
Using Luxture Tile Adhesive & Tile Grout, with this guide and a bit of imagination, you can transform boring surfaces into beautiful, high-fashion tiled surfaces. For your own home renovation project, or a professional project, Luxture products deliver the strength, beauty and performance you expect.
✨ Create network on your walls and floors with Luxture!
